How to Make Jewelry With Your Pet's Hair: A Beginner's Guide

Making jewelry with your pet's hair sounds like something only a professional can do. It is not. With a little patience, a few basic supplies and the right technique, you can make a pendant, a pair of earrings or a bead that you will actually want to wear — and that carries a small piece of an animal you love.

The short answer: prepare a few strands of clean, dry hair, set them in clear jewelry resin in a small mold, cure the resin, and attach the finished piece to a jewelry base like an earring post, a pendant bail or a chain.

What you need

  • A few strands of your pet's hair — clean and completely dry. See how to save and store your pet's fur.
  • Clear jewelry resin — either UV resin (cures under a UV lamp) or two-part epoxy resin.
  • A UV lamp, if you use UV resin.
  • A small silicone mold in the shape you want: a round bead, a teardrop, a small cabochon.
  • Tweezers and a toothpick to place the hair and pop bubbles.
  • Gloves and a ventilated workspace.
  • Jewelry findings — the metal parts that turn the resin piece into jewelry: earring posts, a pendant bail, a chain or a bracelet base, plus a little jewelry glue if needed.

Step by step

  1. Prepare the hair. Choose a few strands. If you want a neat look, gather them and trim them to fit your mold. Lightly sealing the hair first helps prevent bubbles and cloudiness — read more in can you put pet hair in resin?
  2. Pour a thin first layer. Fill the mold about a third of the way with resin and cure it (with the lamp for UV resin, or as instructed for epoxy).
  3. Place the hair. Lay the hair on the cured layer with tweezers and arrange it the way you want it to look.
  4. Cover and cure. Add another thin layer to cover the hair, check for bubbles, and cure.
  5. Fill and finish. Add a final layer to fill the mold and give a smooth top. Cure fully.
  6. Demold. Gently flex the silicone mold to release the piece. If the edges are rough, a thin final coat of resin can smooth them.
  7. Attach the findings. Glue or set the piece on your earring posts, pendant bail or bracelet base, and let the glue cure.

Tips for a clean result

  • Less is more. A few strands look more delicate and elegant than a large tuft, especially in small jewelry.
  • Work in thin layers. It gives you more control and fewer bubbles.
  • Work at room temperature. Cold resin is thicker and traps more air.
  • Practice first. Do a test piece with a strand or two before you use the hair that matters most.
  • Follow the resin instructions. Curing times and safety guidance vary between products.

What can you make?

  • Stud earrings — small, round and easy to wear every day.
  • A pendant — a teardrop or circle on a fine chain.
  • A bracelet bead — a resin bead on a simple cord or chain bracelet.

For more ideas, see 10 keepsake ideas for your pet's fur and horse hair keepsake ideas.

Want it simpler?

We are building DIY kits with everything you need to make petite, wearable jewelry with your pet's hair — guided step by step. Join the list for early access below.

Frequently asked questions

Is it hard to make jewelry with pet hair?
Not really. It takes patience more than skill. Working in thin layers and practicing on a test piece first makes it much easier.

Do I need a UV lamp?
Only if you use UV resin. Two-part epoxy resin cures on its own over time.

How much hair do I need for a pair of earrings?
Just a few strands. Small jewelry looks best with a delicate amount of hair.

Can I use hair from any animal?
Yes. Dog, cat and horse hair can all be used, as long as it is clean and dry.

Back to blog